don
Cite this on a line: [[document:acaa1ba2-8e81-4c1d-b553-2ca46033e3d1]]
From the case files (scan held) · held 5 times (the same file in different folders), shown once · see the original
What it documents
In its own words
Its short version: the statements taken from it, each found word for word in the text below.
“the most common fault on mixers is failing crossfaders”The brochure says failing crossfaders are the most common mixer fault.
“As DJs know, the most common fault on mixers is failing crossfaders.”The brochure says failing crossfaders are the most common fault on mixers.
The text, as we read it
OCR of the page images (tesseract, 200 dpi) · reading quality 0.95 · 4 page(s). Quotes used elsewhere are marked. Check anything that matters against the original.
Designers, manufacturers and distributors of professional mixing equipment
—©) trigger happy
BPM COUNTER
This unique display is the most elegant and advanced monitor of beats yet designed, a visual aid enabling you to see clearly when two tracks are in sync.
The lower part of the BPM counter features two sensitivity controls. These adjust the trigger levels of each channel. When set at the right levels, the light above each sensitivity control will flash when the beat is present; when both channels beat is present and in sync, the mix light will also flash.
sensitivity sensitivity ae KILL ee]
DRUM BASE
Another creation from Intimidation, a unit that produces a beat which can be placed over two incompatible tracks, aiding the mix process; also allowing the user to interact with the music in a unique way
The display calculates, then shows, the precise BPM every second. This is a continuous process and will continue even when the drum base is not in use. By adjusting the tempo control, the BPM can be set to the number of beats required.
When in use, the mix light of the BPM counter will flash orange with each beat, turning another colour when channels 1 and 2 are also in sync.
drum base BPM bpm counter beats and pieces check your head killer cuts creature features
©
The fundamental beat is then carefully selected and used to trigger the 8 bars above each light. These travel up with each beat giving an accurate indicator to the speed of each track. The central mix bars check the mix in progress revealing whether the channels are synchronised. When either Ch 1 or Ch 2 reaches the top the bars are reset and the cycle continues. As this occurs the plus lights above are activated, showing the faster track. If both plus lights are activated simultaneously this indicates both channels are synchronised.
Selector This controls the type of sound produced and is displayed above (1-5).
Filter
This knocks out the beats of both tracks playing . This differs from the kill switches in that it leaves the sub bass frequency intact while removing the beat.
Gain
This controls the levels of the beats over the tracks. This can be turned down whilst the signal can be monitored on the headphones. (See headphones) Override
This feature allows the live creation of your own drum pattern.
On/off
This starts or stops the drum base. The phase of the beats remains constant so the beats will not lose their place when turned on or off.
© KILL SWITCHES
These two sets of unique Intimidation controls seperate the bass, midrange and treble freq with filters.
SPECTRUM ANALYSERS
These 3 way, six segmented bars display the bass, mid and tops signal levels either before or after a track has been introduced via the monitor point
These can be cut out individually, leaving any remaining frequency intact, i.e. bass cut leaving mids and tops; bass and tops cut leaving mids; mids and tops cut leaving bass. This feature presents endless possibilities! control, allowing the signal levels to be accurately monitored and adjusted accordingly. |
©
HEADPHONES
Another revelation from
CLIP LIGHTS
These show when the output signal exceeds safe levels and is close to
Intimidation. Eliminate the music, headphones clipping monitoring just the beats!
Headphone drumbase - This feature assigns a channel to each ear. By replacing the seperate music signals with triggered beats, precise monitoring of tracks can be achieved.
ie)
Itis possible to monitor the drum headphone © base through the headphones via the Saas: drum base level. (See Gain)
The booth output and control eliminates any problems with sound delays in large systems.
REMOVABLE FADERS
As DJs know, the most common fault on mixers is failing crossfaders. Intimidations crossfader can be replaced in minutes.
PAN CONTROLS
These can be used to float segments of tracks around the venue, in conjunction with the kill switches, to great effect.
MICROPHONE
A single balanced mic input with on air switches and bass and treble adjustments.
A MESSAGE FROM INTIMIDATION
Outlined in this brochure is the explanation as to how the tools of The Don can be used, not the possibilities that can be achieved. The results depend upon each and every individual and are limited only by their own imagination.
into
BPM COUNTER®———__
The most elegant and advanced monitor of beats yet designed
DRUM BASE ®&———_
Allowing the user to interact with the music in a unique way
——
HEADPHONE DRUMBASE® _
Eliminate the music, monitoring just the beats!
KILL SWITCHES ®&—__}
Seperate the bass, mid and treble frequencies
SPECTRUM ANALYSERS
Accurate monitoring and adjustment of signal levels
REMOVABLE FADERS
Replacement of failing crossfaders in minutes
PAN CONTROLS |
Float segments of tracks around a venue
CLIP LIGHTS
Indicating when the output signal is close to clipping
MICROPHONE
Single balanced mic input
© unique to intimidation
For further information please contact Steven Carroll at Intimidation on 081-698 9305
Exactly as read (line for line, as the text layer or OCR gave it)
of professional mixing equipment
—©) trigger happy
BPM COUNTER
This unique display is the most
elegant and advanced monitor of
beats yet designed, a visual aid
enabling you to see clearly when
two tracks are in sync.
The lower part of the BPM counter
features two sensitivity controls.
These adjust the trigger levels of each
channel. When set at the right levels,
the light above each sensitivity control
will flash when the beat is present;
when both channels beat is present
and in sync, the mix light will
also flash.
sensitivity
sensitivity
ae KILL ee]
DRUM BASE
Another creation from Intimidation, a
unit that produces a beat which can
be placed over two incompatible
tracks, aiding the mix process; also
allowing the user to interact with the
music in a unique way
The display calculates, then shows,
the precise BPM every second. This is
a continuous process and will continue
even when the drum base is not in
use. By adjusting the tempo control,
the BPM can be set to the number of
beats required.
When in use, the mix light of the BPM
counter will flash orange with each
beat, turning another colour when
channels 1 and 2 are also in sync.
drum base
BPM
bpm counter
beats and pieces
check your head
killer cuts
creature features
©
The fundamental beat is then
carefully selected and used to
trigger the 8 bars above each light.
These travel up with each beat giving
an accurate indicator to the speed of
each track. The central mix bars check
the mix in progress revealing whether
the channels are synchronised. When
either Ch 1 or Ch 2 reaches the top
the bars are reset and the cycle
continues. As this occurs the plus
lights above are activated, showing the
faster track. If both plus lights are
activated simultaneously this indicates
both channels are synchronised.
Selector
This controls the type of sound produced and is
displayed above (1-5).
Filter
This knocks out the beats of both tracks
playing . This differs from the kill switches in
that it leaves the sub bass frequency intact
while removing the beat.
Gain
This controls the levels of the beats over the tracks.
This can be turned down whilst the signal can be
monitored on the headphones. (See headphones)
Override
This feature allows the live creation of your own
drum pattern.
On/off
This starts or stops the drum base. The phase of the
beats remains constant so the beats will not lose their
place when turned on or off.
©
KILL SWITCHES
These two sets of unique Intimidation controls seperate
the bass, midrange and treble freq with filters.
SPECTRUM ANALYSERS
These 3 way, six segmented bars
display the bass, mid and tops signal
levels either before or after a track has
been introduced via the monitor point
These can be cut out individually, leaving any remaining
frequency intact, i.e. bass cut leaving mids and tops; bass and
tops cut leaving mids; mids and tops cut leaving bass. This
feature presents endless possibilities!
control, allowing the signal levels to be
accurately monitored and adjusted
accordingly. |
©
HEADPHONES
Another revelation from
CLIP LIGHTS
These show when the output signal
exceeds safe levels and is close to
Intimidation. Eliminate the music, headphones clipping
monitoring just the beats!
Headphone drumbase - This feature
assigns a channel to each ear. By
replacing the seperate music signals
with triggered beats, precise
monitoring of tracks can be achieved.
ie)
Itis possible to monitor the drum headphone ©
base through the headphones via the Saas:
drum base level. (See Gain)
The booth output and control
eliminates any problems with sound
delays in large systems.
REMOVABLE FADERS
As DJs know, the most common
fault on mixers is failing
crossfaders. Intimidations
crossfader can be replaced in
minutes.
PAN CONTROLS
These can be used to float
segments of tracks around the
venue, in conjunction with the kill
switches, to great effect.
MICROPHONE
A single balanced mic input with
on air switches and bass and
treble adjustments.
A MESSAGE FROM INTIMIDATION
Outlined in this brochure is the explanation as to how the tools of The Don can be used, not the possibilities that
can be achieved. The results depend upon each and every individual and are limited only by their own imagination.
into
BPM COUNTER®———__
The most elegant and advanced monitor of beats yet designed
DRUM BASE ®&———_
Allowing the user to interact with the music in a unique way
——
HEADPHONE DRUMBASE® _
Eliminate the music, monitoring just the beats!
KILL SWITCHES ®&—__}
Seperate the bass, mid and treble frequencies
SPECTRUM ANALYSERS
Accurate monitoring and adjustment of signal levels
REMOVABLE FADERS
Replacement of failing crossfaders in minutes
PAN CONTROLS |
Float segments of tracks around a venue
CLIP LIGHTS
Indicating when the output signal is close to clipping
MICROPHONE
Single balanced mic input
© unique to intimidation
For further information please
contact Steven Carroll at Intimidation on
081-698 9305
The readable layout changes only the layout: pages, paragraphs, headings and lists, running headers and page numbers taken out, words split at a line end joined. The words are as read.
Other readings held: text_layer (0.61)